LFP 180 Portable Battery Power Packs
Pictured is a pair of 12 volt LFP (Lithium Iron Phosphate) portable battery power packs that can be used to store and deliver power anywhere and anytime power is needed to power electric equipment.
A DC to AC inverter can also be used with the portable battery modules to turn the 12v battery power into 120v or 240v AC power up to 2000W. Let us know what your needs are and we can help provide quality inverter upon request.
The LiFePo4 / LFP / Lithium Iron Phosphate batteries provide superior performance when compared to the old Deep Cycle Lead Acid Batteries or AGM batteries because they are 60% lighter in weight which drastically reduces the weight of the LFP 180 Battery Modules. The LFP 180 battery module weighs 75 pounds as you see it pictured here. A comparable Deep Cycle battery of the same capacity weighs in at about 160 pounds for just the battery alone. The LFP 180 battery module can be moved and rolled around on its wheels easily by most average sized people.
The next major advantage that LiFePo4 / LFP / Lithium Iron Phosphate batteries give you is superior life span or charge / discharge cycles when compared to the old Deep Cycle Lead Acid or AGM batteries. The LFP 180 Battery Module can provide up to 10 times longer lifespan or charge / discharge cycles compared to Deep Cycle Lead Acid or AGM batteries under most conditions. So if we drained the LFP 180 portable battery module from 100% full to 30% full the battery is rated to last 3000 cycles to be conservative. If we do the same thing with most Deep Cycle Lead Acid Batteries we only end up with 300 cycles before the battery is rated to need replaced most manufacturers. So the LFP 180 portable battery packs when drained down to 30% full consistently will outlast the same capacity Deep Cycle Lead Acid or AGM battery by 10 times or 1000% which is amazing.
Another key benefit that LiFePo4 / LFP / Lithium Iron Phosphate batteries provide is that they actually provide 100-90% of their rated capacity when drained at high rates of current which is very nice when you compare it to how a comparable sized Deep Cycle Lead Acid Battery usually only provides around 60% of their rated capacity when drained at high rates which means the remaining 40% of stored power in the Deep Cycle battery just disappears and you do not get to use it. LFP batteries prove to be superior again in this respect.
Another benefit of LiFePo4 / LFP / Lithium Iron Phosphate batteries is that they are made out of Non Toxic ingredients and will not ignite or explode if punctured or shot while in combat. Other types of lithium batteries can be very dangerous and explode under some circumstances.
And the last benefit of LiFePo4 / LFP / Lithium Iron Phosphate batteries is that the actual battery pack is smaller in size than a Deep Cycle Lead Acid / AGM battery which allows the case to be smaller and the overall size and weight of the system to be smaller.
The system is housed in a rugged Pelican 1440 Hard Case and the specs for this case can be found HERE
The system as pictured comes with a 10 Amp AC battery charger. This battery charger plugs into a regular 120v or 220v AC power outlet and the output end connects to the battery terminals for recharging. This battery charger can recharge the battery from empty to full in approx 18 hours. The AC charger has a LED read out that shows the charging status of the battery and will display different error messages if a error occurs. A Rapid 2.5 Hour 90 Amp AC Battery Charger is optional upon request.
There is a digital battery monitor display that provides the exact state of charge of the battery from 0 - 100% like a fuel tank gauge in your vehicle only this one is more accurate. There is also a special "Time To Go" reading that gives you the hours and Min's you have left until the battery will be empty based on your current power load at any given time. The battery voltage, consumed energy in Amp Hours, and the Amp current IN or Out of the battery at any given time. The battery monitor also logs the last 180 days of battery usage and provides a lot of different data about how the battery has been used over time.
The output of system is 12.8V DC up to 250 Amps / 3500 Watts. DC to AC inverters can also be used to get AC power from the system to power AC equipment.
There is a Cigarette Lighter output on the outside wall of the case by the handle which provides a common 12v cigarette lighter outlet and this outlet is limited by 15 amps or 200 watts. This outlet is protected by a resettable breaker so if you pull to much power the breaker will trip and then can be easily reset if needed. This cigarette lighter outlet is perfect for a small inexpensive 200w DC to AC inverter with USB charging outlet, or to simply plug in a cellphone charger when needed.
A simple 1 button ON/OFF/Reset switch is on the top panel and makes it easy to turn the 12v output ON or OFF. If a fault or under voltage condition occurs then simply cycle the ON/OFF/Reset switch until the power is applied again and then you can begin charging or using the system as needed.
This system is custom built to order and can take 4-8 weeks before this system is ready to ship. If you need your order ASAP then please contact us to discuss urgent delivery options.
Please use the "Questions" button on the left of this page to get answers to any question you might have about this system.